The Group is taking part in the two boat shows with seven premieres in Cannes and the debut of Custom Line 50 and wallywind110 in Monte Carlo.

Ferretti Group is attending the 46th Cannes Yachting Festival in grand style, the go-to international yachting event set against the enchanting backdrop of the Cote d’Azur and held this year from September 10 to 15.
The new products being debuted by the Group on the Croisette in Cannes are Custom Line Navetta 38, Pershing GTX80, Ferretti Yachts INFYNITO 80, Ferretti Yachts 670, Riva El-Iseo, wallywhy100 and wallypower50, accompanied by a spectacular fleet of 19 models.

Custom Line Navetta 38 is the latest made-to-measure yacht in the brand’s Navetta displacement line. With newly designed exteriors and interiors and the very highest cruising standards, the yacht is a masterpiece of naval art that combines innovative engineering with typically Italian style and sophistication. Continuity between interiors and exteriors, spacious areas for outdoor comfort and conviviality, and direct contact with the water translate into an outstanding cruising experience.
The beach club, which is connected to the main deck cockpit and at anchor can be extended on both sides, is a distinctive feature of the yacht and a functional new concept for this generously sized, multi-functional space that dialogues constantly with the outdoor areas on the other decks.
Naval Architecture: Ferretti Group Engineering Department
Exterior Design: Filippo Salvetti
Interior Design: ACPV ARCHITECTS Antonio Citterio Patricia Viel
Shipyard: Custom Line (Ancona)
Technical Data:
 - Engines: 2 x MAN V12 LE446 - 1400 CR power 1400 mhp / 1029 kW at 2300 rpm
 - LOA: 38.76 m – 127 ft 2 in
 - LOH: 38.66 m – 126 ft 10 in
 - Maximum beam: 8 m – 26 ft 3 in 

Pershing GTX80 is synonymous with fun and excitement, as well as representing a new standard of spirited comfort in which the spaces flow together, establishing absolute continuity between interiors and exteriors. The 23-square-metre sundeck offers best-in-class liveability, while the GTX Series’ standout SeaScape feature provides direct, unbounded connection with the sea.
Exterior Design: Vallicelli Design
Interior Design: Vallicelli Design
Shipyard: Pershing (Mondolfo)
Preliminary Data:

 - Engines: 3 x VOLVO PENTA D13 IPS1350, power 1000 mhp
 - LOA: 23.98 m – 78 ft 8 in
 - LOH: 23.26 m – 76 ft 4 in
 - Maximum beam: 5.80 m – 19 ft 0 in 

Ferretti Yachts INFYNITO 80, the second model in the INFYNITO line, points up the defining characteristics of the range: a focus on the environment, extensive covered outdoor areas, continuity between interiors and exteriors, unprecedented versatility and innovative layouts. The yacht’s main strengths are the iconic All-Season Terrace forward – offering a unique on-board living experience in terms of privacy and comfort – and the possibility of choosing between an open or semi-closed sundeck. And then there’s the sheer size, way above average for the segment, of the exterior surface areas covered and protected by the hard top or superstructure.
Exterior Design: Filippo Salvetti
Interior Design: Ideaeitalia
Shipyard: Ferretti Yachts (Marina di Ravenna)
Preliminary Data:
 - 2 x MAN V8 power 1200 mhp / 882 kW at 2300 rpm (STD)
 - 2 x MAN V12 power 1400 mhp / 1029 kW at 2300 rpm (OPT)

LOA: 23.70 m – 77 ft 9 in
LOH: 23.58 m – 77 ft 4 in
Maximum beam: 6.32 m - 20 ft 9 in 

Ferretti Yachts presents the new version of the Ferretti Yachts 670, one of the top-selling models in the Flybridge range, with a refreshed exterior design that preserves the model’s distinctive features such as the elegant combination of volumes and the light-filled interiors. The main deck features generous seating solutions and maximum storage space in the dining/galley and lounge areas, as well as a special focus on the design of the sound systems. The helm station’s seamless windscreen offers outstanding visibility and the ergonomics of the bow area have been improved by modifying the design of the dinette. The major new features introduced on the flybridge include more seating and more comfort in the al-fresco dining area, the option of furnishing the stern terrace with a generous sunpad, and a completely redesigned hard top with an opening central section.
Exterior Design: Filippo Salvetti
Interior Design: Ideaeitalia
Shipyard: Ferretti Yachts (Forlì)
Preliminary Data:
 - 2 x MAN V8-1000 power 735 kW / 1000 mhp at 2300 rpm (STD)
 - 2 x MAN V8-1200 power 882 kW / 1200 mhp at 2300 rpm (OPT)

LOA: 20.24 m – 66 ft 5 in
LOH: 19.29 m – 63 ft 3 in
Maximum beam: 5.38 m – 17 ft 8 in 
Riva El-Iseo is Riva’s first full-electric powerboat. A 27-foot runabout with elegant and sophisticated lines, Riva El-Iseo is a remarkable mix of innovation and heritage that blends the brand’s signature style features with a modern, linear design to create a contrast between tradition and modernity that captures the boat’s concept. Equipped with a Parker GVM310 full-electric engine from Parker Hannifin and a high-energy-density lithium battery pack from Podium Advanced Technologies, Riva El-Iseo is the first full electric powerboat to obtain RINA B Category certification.
Exterior Design: Officina Italiana Design
Interior Design: Officina Italiana Design
Shipyard: Riva (Sarnico)
Technical Data:
 - Engines: 1 x Parker GVM310 power 340 mhp / 250 kW at 4000 rpm (peak 300 kW) + Mercury 3XR stern drive Batteries: high-energy-density lithium batteries by Podium Advanced Technologies –150 kWh, 800 V
 - LOA: 8.35 m - 27 ft 5 in
 - LOH: 8.21 m – 26 ft 11 in
 - Maximum beam: 2.50 m – 8 ft 2 in 
The wallywhy100, making her debut at the Cannes Yachting Festival, is the logical extension of the next-gen wallywhy range, drawing on the key features that have marked her larger sisters – the wallywhy200 and wallywhy150 – to deliver a 21.4-metre yacht that’s unique in the segment and elicits deep, relaxed sighs from guests as easily as she sets pulses racing with her looks and performance.
The iconic stealth-style glass superstructure is laid out on a single living level, creating the most innovative open/closed space from bow to stern ever seen. It all culminates in the signature aft sea terrace, a beach area which on the wallywhy100 stretches to 14 square metres, with drop-down wings that extend the terrace by close to 50 percent, offering unobstructed views across the water.
There is a full-beam master cabin aft on the lower deck, complete with ensuite that features electrically switched privacy glass. There are also two guest cabins, comprising a VIP stateroom and a twin to starboard, both boasting ensuites and both offering large hull portholes. The foredeck has a dedicated, multi-use lounge that can serve as an aperitivo area or a spot for alfresco meals sitting around a dining table with seats that can be converted into stern-facing sun loungers.
Exterior Design: Wally and Ferretti Group Engineering
Interior Design: Wally and Studio Vallicelli Design
Shipyard: Wally / Ferretti Group (Forlì)
Technical Data:
 - 2 x Volvo Penta D13 IPS1200 power 1000 mhp / 662 KW at 2300 rpm (std)
 - 2 x Volvo Penta D13 IPS1350 power 1000 mhp / 735 KW at 2400 rpm (opt)

LOA: 21.46 m - 70 ft 5 in
LOH: 21.37 m - 70 ft 1 in
Maximum beam: 5.73 m - 18 ft 10 in 
The new wallypower50 broadens the range, acting as a link between the wallytenders and the wallypowers and establishing a new standard for being flexible, practical, dynamic and iconic.
The design concept is that of a bridge between the open style of the wallytender43 and wallytender48 and the more generous wallypower58. The resulting model satisfies a wide range of customers and usage scenarios: from support vessel to comfortable family cruiser.
The layout of the wallypower50 stands out for practicality thanks to the raised cockpit, which can accommodate eight people under the hardtop and four more on forward-facing seats, while the generous open space below deck offers maximum flexibility, completed by a comfortable bathroom with a separate shower, a large couch and a double bed. The two Volvo Penta IPS650 engines drive the wallypower50 to a top speed of 36 knots and a cruising speed of 30 knots, ensuring easy manoeuvring in close-quarters situations thanks to the joystick with DPS option. The deep-V hull translates into sporty cruising even in rough seas. The wallypower50X is the version available with four 400 hp Mercury outboards, delivering a top speed of 48 knots while maintaining a range of 240 nautical miles.
Exterior Design:  Wally and Ferretti Group Engineering
Interior Design: Ideaeitalia
Shipyard: Wally / Ferretti Group (Forlì)
Technical Data:

 - Engines: 2 x Volvo Penta IPS650 power 480 mhp / 353 kW at 3700 rpm
 - LOA: 14.6 m - 47 ft 11 in
 - LOH: 14.6 m - 47 ft 11 in
 - Maximum beam: 4.3 m - 14 ft 1 in 

Ferretti Group will be bringing an outstanding fleet to the Monaco Yacht Show too, consisting of 8 amazing models and featuring two world premieres: Custom Line 50 and wallywind110.
Custom Line 50, the new flagship in the aluminium made-to-measure line, makes her debut in the market segment for 50-meter metal yachts under 500 GT. Designed and built entirely from aluminium, the new Custom Line 50 embodies the brand’s values and reimagines marine tradition through a contemporary lens.
The superyacht extends across four decks, with a layout design centred around the master suite forward on the upper deck. The owner’s stateroom, surrounded by windows that offer a 180-degree view, provides direct access to a large private terrace in the bow, featuring a beautiful, spacious and completely private lounge area with sunpad, ensuring total privacy. Custom Line 50 accommodates 12 passengers in 4 VIP cabins on the lower deck and the master stateroom, and nine members of crew. Generous open-air spaces and continuity between interiors and exteriors are distinctive features of Custom Line 50, pointed up by expansive floor-to-ceiling glazing and reflective surfaces that convey the feeling of being on an island rising from the seascape.
The spacious beach club, which extends across the special swing-down gunwales and becomes a private oasis for use at any time of day, forms an integral part of the main deck, connected by a rectangular infinity pool with breathtaking vistas over the sea.
Naval Architecture: Ferretti Group Superyachts Division – Metal Ship Engineering Department.
Exterior Design: Filippo Salvetti
Interior Design: ACPV ARCHITECTS Antonio Citterio Patricia Viel
Shipyard: Ferretti Group Superyacht Yard (Ancona)
Preliminary Data:
 - Engines: 2 x CAT C32 ACERT 1081 kW at 2050-2150 rpm
 - LOA: 49.94 m – 163 ft 9 in
 - LOH: 45.35 m – 148 ft 79 in
 - Maximum beam: 9.60 m – 31 ft 50 in 

The wallywind110 is the first model in the wallywind performance cruiser range, which will also include the wallywind130 and the wallywind150, and will make her debut at the Monaco Yacht Show 2024.
The full-carbon hull laminated on a female mould is painted a luminous metallic hue with blue highlights, which changes almost imperceptibly with the light. The focus on performance is confirmed by the 6.95 metre telescopic keel, by the two carbon fibre rudders and by the striking 48 metre Hall Spars mast. And with an 80 sqm cockpit free of technical gear, guests can enjoy the experience of a full-fledged sea terrace.
Exterior Design: Wally / Santa Maria Magnolfi
Interior Design: Wally / Santa Maria Magnolfi
Shipyard: Wally / Ferretti Group
Technical Data:
 - Engines: Cummins QSB 6.7 355 hp
 - LOA: 33.42 m - 109 ft 3 in
 - Maximum Beam: 7.60 m
 - Draught: 4.50 / 6.95 m